EV Projects

Screwfix, HQ

This is an existing office/warehouse where the client requires 18 Twin 7kW chargers to be installed as well as 2 Twin 22kw Chargers in the external car park. The client took the responsibility of requesting a connection from the DNO which was to be installed in a Feeder Pillar for the Rapid 22kw units. The 7kw units were to be fed from the internal main switch room supply. My responsibilities included creating a survey checklist and developing the design. I also created drawings that included EVC layout drawings as well as civil drawings, cable reticulation, LV schematics and feeder pillar elevations.

Hermes, Colossus

This is an existing warehouse where the client requires 5 Twin 7kW chargers to be installed as well as 1 Twin 22kw Chargers in the external car park. The client took the responsibility of requesting a connection from the DNO which was to be installed in a Feeder Pillar for the Rapid 22kw units. My responsibilities included creating a survey checklist, pricing the job and developing the design. I also created drawings that included EVC layout drawings as well as civil drawings, cable reticulation, LV schematics and feeder pillar elevations.

Whitefrairs-Undeground Car Park-London

This is an existing residential building where the client required passive infrastructure to be installed so that the current tenants could install EV chargers. This involved design and specifying a Busbar installation fed via a proprietary Load management system. This project proved to be difficult as the client was unable to provide any drawings for the building and a carpark drawing had to be created from scratch aided with 3D mapping. All the installation works were to be done by a third-party contractor with Electrical design to be done in house. My responsibilities included leading the creation of all the design documentation and fixing details along with a installation specification all in compliance with BS7671. This included creating design drawings and documentation that included EVC layout drawings, containment drawings and sizing, block diagrams, EVC location elevation drawings, Busbar fixing details, full coordination with existing structures well as civil drawings, cable reticulation, Trimble cable calculations and switch room elevations.